AH500 Operation Manual AH04HC-5A 2-73 Item Specifications A connector made with great precision is used. It has to be connected to an external terminal module. Connector Number of channels 4 channels Channel 0: X0.8+, X0.8-, X0.9+, and X0.9- Channel 1: X0.10+, X0.10-, X0.11+, and X0.11- Channel 2: X0.12+, X0.12-, X0.13+, and X0.13- Channel 3:
X0.14+, X0.14-, X0.15+, and X0.15- Input (differential signal) Pulse/Direction (one phase and one input) Counting up/Counting up (one phase and two inputs) One time the frequency of A/B-phase inputs (two phases and two inputs) Four times the frequency of A/B-phase inputs (two phases and two inputs) Input signal Pulse format Signal level 5~24 V DC Maximum The maximum frequency is 200 kHz. frequency of counting The number of sampled pulses is in the range of -200000 to 200000. The number of accumulated pulses is in the range of -999999999 to 999999999. The number of input pulses is in the range of -2147483648 to 2147483648. Specifications Range Linear count Circular count Type Channel 0:
X0.0+ and X0.0- Channel 1: X0.1+ and X0.1- Channel 2: X0.2+ and X0.2- Channel 3: X0.3+ and X0.3- Input (differential signal) RESET input Signal level 5~24 V DC Maximum 15 mA current Channel 0: The high-speed pulse output Y0.8 is a transistor whose collector is an open collector. Channel 1: The high-speed pulse output Y0.9 is a transistor whose collector is an open collector. Channel 2: The high-speed pulse output Y0.10 is a transistor whose collector is an open collector. Channel 3: The high-speed pulse output Y0.11 is a transistor whose collector is an open collector. Output type Comparison output Signal level 24 V DC Maximum 15 mA current Weight 200g