Chapter 2 Specifications and System Configuratio n 2.10 Specifications for Power Supply Modules 2.10.1 General Specifications AHPS05-5A AHPS15-5A 2-106 Item Specifications 100~240 V AC (-15%~10%) 50/60 Hz±5% Supply voltage Action If the input power supply is larger than 85 V AC, the power supply module can function normally. specifications Allowable If the instantaneous power failure time is within ten milliseconds, the power supply module keeps running. instantaneous power failure time Fuse 4 A/250 V AC Inrush current 45 A within 1 millisecond at 115 V AC The maximum current is 2.5 A. It is only for a backplane.
24 V DC output The 24 V DC output is equipped with the short circuit protection and the overcurrent protection. Power protection Surge voltage 1,500 V AC (Primary-secondary), 1,500 V AC (Primary-PE), 500 V AC (Secondary-PE) withstand level Above 5 MΩ (The voltage between all inputs/outputs and the ground is 500 V DC.) Insulation voltage The diameter of the ground should not be less than the diameters of the cables connected to the terminals L and N.
Ground Item Specifications Supply voltage 24 V DC (-35%, +30%) Allowable 10 milliseconds instantaneous power failure time Fuse 6.3 A/250 V AC Inrush current 30 A within 100 milliseconds 24 V DC output 1.5 A Maximum output 36 W power The 24 V DC output is equipped with the short circuit protection, the overcurrent protection, and the overvoltage protection. Power protection Surge voltage 500 V AC withstand level Ground The diameter of the ground should be greater than 1.6 mm2. Weight 400g