AH500 Operation Manual 5.1 Introduction of Devices This section gives an account of values/strings processed by the PLC. It also describes the functions of devices which include input/output/auxiliary relays, timers, counters, and data registers. 5.1.1 Devise Table 5.1.1.1 AH500 basic series CPU Modules (AHCPU500/510/520/530) *1: The decimal forms are notated by K in the device lists in Chapter 5 and Chapter 6 in AH500 Programming Manual, whereas K50 should be inputted in ISPSoft rather than merely 50. *2:
The floating-point numbers are notated by F/DF in the device lists in Chapter 5 and Chapter 6 in AH500 5-2 Type Device name Number of devices Range Bit device Input relay X 1024 (AHCPU500) X0.0~X63.15 2048 (AHCPU510) X0.0~X127.15 4096 (AHCPU520) X0.0~X255.15 8192 (AHCPU530) X0.0~X511.15 Output relay Y 1024 (AHCPU500) Y0.0~X63.15 2048 (AHCPU510) Y0.0~X127.15 4096 (AHCPU520) Y0.0~X255.15 8192 (AHCPU530) Y0.0~Y511.15 Data register D 16384 (AHCPU500) D0.0~D16383.15 32768 (AHCPU510) D0.0~D32767.15 65536 (AHCPU520/530) D0.0~D65535.15 Link register L 16384 (AHCPU500) L0.0~D16383.15 32768 (AHCPU510) L0.0~D32767.15 65536 (AHCPU520/530) L0.0~D65535.15 Auxiliary relay M 8192 M0~M8191 Special auxiliary relay SM 2048 SM0~SM2047 Stepping relay S 2048 S0~S2047 Timer T 2048 T0~T2047 Counter C 2048 C0~C2047 32-bit counter HC 64 HC0~HC63 Word device Input relay X 512 X0~X511 Output relay Y 512 Y0~Y511 Data register D 16384 (AHCPU500) D0~D16383 32768 (AHCPU510) D0~D32767 65536 (AHCPU520/530) D0~D65535 Special data register SR 2048 SR0~SR2047 Link register L 16384 (AHCPU500) L0~D16383 32768 (AHCPU510) L0~D32767 65536 (AHCPU520/530) L0~D65535 Timer T 2048 T0~T2047 Counter C 2048 C0~C2047 32-bit counter HC 64 (128 words) HC0~HC63 Index register E 32 E0~E31 Constant* Decimal system K 16 bits:
-32768~32767 32 bits: -2147483648~2147483647 Hexadecimal system 16# 16 bits: 16#0~16#FFFF 32 bits: 16#0~16#FFFFFFFF Single-precision floating-point number F 32 bits: ±1.17549435-38~±3.40282347+ 38 Double-precision floating-point number DF 64 bits: ±2.2250738585072014-308~ ±1.7976931348623157 + 308 String* String “$” 1~31 characters