Delta Electronics AH500 — 6.5 Creating a Program

AH500 Operation Manual The hardware configuration is not complete until the parameters in the CPU module and AH16AP11R-5A are set. However, the configuration and the setting must be downloaded to the CPU module so that they can take effect. The configuration and the setting are saved here, and will be downloaded with the program in the project later. If the users want to save the configuration and the setting, they can click Save on the File menu, or on the toolbar. After the configuration and the setting are saved, the users can close the HWCONFIG window. *. Please refer to chapter 8 for more information about HWCONFIG.

6.5 Creating a Program The following sections will lead users to create a traditional ladder diagram in ISPSoft. The contents of the following sections include creating a POU, editing a traditional diagram, and compiling a program. The users are expected to equip themselves with the basic abilities to create a traditional ladder diagram in a short time. 6-8