Chapter 8 Hardware Configuration (2) Point to Replace on the context menu, and then click Sam Type or All . Same Type A module selected is replaced by a same type of module. After the module is replaced, the input/output devices assigned to the new module are the same as the input/output devices assigned to the module replaced. Besides, if the parameters in the new module are not the same as the parameters in the module replaced, the setting of the parameters in the new module will be restored to the default values. All A module selected can be replaced by any type of module.
After the module is replaced, the different input/output devices will be assigned to the new module, and the s etting of the parameters in the new module will be restored to the default values. (3) After users click Same Type or All , the Module Selection window will appear. Items which can be selected will be displayed in the window. After the users decide on a module, they can double-click the module in the window. 8.1.2.6 Searching for/Replacing a Module (1) After users click Search on the Option menu, the Find and Replace window will appear. 8-14