AH500 Operation Manual Method 2 (1) Click a slot on which a module will be pasted in the system configuration area or on the information list. (2) Click Paste on the Edit menu, or on the toolbar. Additional remark A module which is cut can only be pasted once. When a module is cut/pasted, the parameters in the module are processed as follows. Input/Output device range : The input/output devices assigned to the module cut are automatically assigned to the module pasted. Comment about the module : The comment about the module cut is copied into the module pasted. Parameters in the module : The parameters in the module cut are copied into the module pasted. Data registers :
The data registers assigned to the module cut are automatically assigned to the module pasted. Parameters in the intelligent module : The setting of the parameters in the intelligent module is copied. *. Some intelligent modules can be set by means of exclusive configuration tools. Please refer to section 8.3.4 for more information. 8.1.2.9 Dragging a Module All modules in the system configuration area can be dragged by the mouse except the CPU module and the power supply module. Condition 1 Drag a module to a vacant slot when the left mouse button is held. The module will be moved to a new position. Condition 2 Drag a module to an occupied slot when the left mouse button is held.
The two modules will be interchanged. * When a module is dragged, the input/output devices assigned to the module, the comment about the module, the 8-21