Delta Electronics AH500 — 8.2.2.3 CPU: Latched Device Range

AH500 Operation Manual (2) Please select values in the boxes. The value in the left box is a start address, and the value in the right box is an end address. The value in the left box must be less than the value in the right box. Besides, the value in the left box can not be less than the minimal value at the left end of the rectangular bar, and the value in the right box can not be larger than the maximal value at the right end of the rectangular bar. (3) If all the devices in the block are not latched devices, the users can click Clear . After the users click Clear , the boxes become gray, and the range of latched devices will be -1~-1.

(4) If the users want to restore the setting to the default values, they can click Default . After the users click Default , the setting will be restored to the default values. Additional remark A range of latched devices of a certain type may not include all the devices of that type. If there is restriction on the maximum number of latched devices of a certain type, a related hint will be under the setting area. In the setting page for the data registers in AHCPU530-EN, the hint indicates that the maximum number of latched data registers is 32768. In other words, in the range of 0 to 65535, the number of latched data registers should be less than or equal to 32768, e.g.

0~32767 or 10000~42767. 8-35