Chapter 8 Hardware Configuration 8.2.5.4 Ethernet ─ Advance: Email Trigger After users click the Ethernet─Advance tab at the top of the window, and the Email Trigger tab at the bottom of the window, they can set triggers for the sending of emails. Before setting triggers, users have to click the Email tab, and select the Enable Email Sending Function checkbox. Please refer to section 8.2.5.3 for more information. Triggers are listed in the Trigger Configuration table. Users can set eight triggers at most. If users want to set or view a trigger, they can double-click the trigger in the table. The Trigger Configuration window will appear.
(1) Type a trigger name and an interval of triggering the sending of an email in the Trigger Setting section. Trigger Name Users can type a trigger name in the Trigger Name box. Only English letters, numerical digits, or special marks can be typed in the box. A trigger name is composed of 16 characters at most. If the sending of an email is due to this trigger, the trigger name will be put in the subject of this email. Trigger Interval Users can set an interval of triggering the sending an email. Ten minutes are taken as a unit. If the 8-42