AH500 Operation Manual There are two ways to add a network module to the working area. Method 1 Select a network module on the device list, and then drag it to a PLC in the working area. If the PLC does not support the network module selected, the mouse cursor becomes . An AH10EN series module can only be put on a main backplane. Eight AH10EN series modules at most can be put on a main backplane. An AH10SCM series module can be put on an extension backplane. The number of AH10SCM series modules which can be put on a backplane depends on the number of slots on the backplane. Users can choose a backplane to which an AH10SCM series module is dragged.
at the right side of a node, an extension rack will be added to the node. After the users drag an AH10SCM series module to 9-14