Delta Electronics AH500 — 11.1.2 Constructing a PLC Link in NWCONFIG in ISPSoft

AH500 Operation Manual 11.1 PLC Link (for AHCPU5X0 models) This function is applicable for AH500 basic CPU module series (AHCPU500/510/520/530). 11.1.1 Introduction of a PLC Link A PLC Link is a network mechanism for data exchange performed through an RS-485 cable. If there are several nodes in an RS-485 network, users can create a mechanism for data exchange in the network. If the parameters which are set are downloaded to the PLC which functions as a master station, the system of the PLC will perform data exchange through special auxiliary relays and special data registers when the PLC runs.

11.1.2 Constructing a PLC Link in NWCONFIG in ISPSoft Constructing a PLC Link A PLC Link is a network mechanism for data exchange performed through an RS-485 cable. If there are several nodes in an RS-485 network, users can create a mechanism for data exchange in the network. If the parameters which are set are downloaded to the PLC which functions as a master station, the system of the PLC will perform data exchange through special auxiliary relays and special data registers when the PLC runs. A PLC Link is a master/slave model.

There is only one master station in an RS-485 network, and the other stations which are slave stations passively receive reading/writing commands from the master station. The slave stations can not exchange data. They have to exchange data through the master station. 11-2