Chapter 11 Convenient Functions The present network created in NWCONFIG is shown below. The slave station to which the station address 1 is assigned is a DVP-SV2 series PLC. After the data exchange table in the DVP-SV series PLC is uploaded, the device types shown in the data exchange table in the PLC Link Table Editor window will be consistent with the device names shown in the working area in NWCONFIG. The device ranges set for the DVP-SV2 series PLC is not within the device range for DVP-SV2 series PLC, and therefore “Disabled” appears in the Status cell for the DVP-SV2 series PLC. D.
Managing a Data Exchange Table There are buttons under the data exchange table in the PLC Link Table Editor window. Please refer to the table below for more information about the buttons. If users click , the system will lead the users to the previous step. 11-13 Item Description Export The data in the data exchange table can be exported as a CSV file. The users can edit the CSV file through Microsoft Excel. The CSV file can also be used as reference material for another development work. Reset After the users click the button, the setting in the data exchange table will be restored to the initial setting.
Check Settings After the users click the button, the data exchange table will be checked. Upload After the users click the button, the parameters related to a PLC Link in the master station will be uploaded. Download After the users make sure that the setting of a PLC Link is correct, they can download the setting to the master station by clicking the button.