Delta Electronics AH500 — 11.1.2.6 Important Points About Constructing a PLC Link

AH500 Operation Manual If the users double-click the Value cell for a device, or click Edit Value on the context menu after they right-click the Value cell, they can type a value in the Enter Value window. If the users double-click the Device Comment cell for a device, or click Edit Comment on the context menu after they right-click the Device Comment cell, they can make a comment on the device. The comments made are for the PLC Link constructed. They are not related to the comments on the devices in the program created in ISPSoft.  Users can type a value in the box.  Users can select a data format.  Users can display or hide the binary mode.

 In the binary mode, users can set the states of the bits through the mouse. 11.1.2.6 Important Points About Constructing a PLC Link There is only one master station in an RS-485 network. If the node designated as a master station has several serial ports, the node can not be designated as a master station in another RS-485 network, but can be designated as a slave station in another RS-485 network. In the figure below, C1 on the node AH-01 is designated as a master station in network #1, and TR1 on the node AH-01 is designated as a slave station in network #2. Besides, C1 on AH-01 and TR2 on AH-01 are connected to network #1. The station addresses assigned to these two ports are different.

As a result, TR2 is allowed to be designated as a slaved station in network #1. 11-18