Chapter 2 Specifications and System Configuratio n AH500 system configuration 2.4 Specifications for Digital Input/Output Modules 2.4.1 General Specifications Electrical specifications for the inputs on digital input/output modules (The signals passing through the inputs are 24 V DC signals.) 2-10 Configuration Description Main backplane There is one main backplane in an AH500 system. Four-slot main backplane: AHBP04M1-5A Six-slot main backplane: AHBP06M1-5A Eight-slot main backplane: AHBP08M1-5A Twelve-slot main backplane: AHBP12M1-5A Extension backplane There are seven extension backplanes at most in an AH500 system. Six-slot extension backplanes:
AHBP06E1-5A Eight-slot extension backplanes: AHBP08E1-5A Extension cable There are four types of lengths. AHACAB06-5: 60 cm AHACAB10-5A: 1 m AHACAB15-5A: 1.5 m AHACAB30-5A: 3 m Power supply module Every backplane needs a power supply module. (The voltages of the alternating currents which can flow into AHPS05-5A range from 85 V to 264 V, and the direct currents which can flow from AHPS05-5A are 5 A. AHPS05-5A is used with a backplane. The voltages of the direct currents which can flow into AHPS15-5A are 24 V, and the direct currents which can flow form AHPS15-5A are 1.5 A.) CPU module There is one CPU module in an AH500 system. AHCPU530-RS2 and AHCPU530-EN CPU modules.
Digital I/O module Digital I/O modules, analog I/O modules, and temperature measurement modules can be installed in an AH500 system unlimitedly. Analog I/O module Temperature measurement module Motion control module Motion control modules can only be installed on a main backplane. Network module Network modules can only be installed on a main backplanes. Eight AH10EN-5A modules at most can be installed on a main backplane, and eight AH10DNET-5A modules at most can be installed on a main backplane. However, AHSCM-5A modules can be installed on a main backplane unlimitedly.
Model AH16AM10N AH32AM10N AH32AM10N AH32AM10N AH64AM10N AH16AP11R AH16AP11T AH16AP11P Item -5A -5A -5B -5C -5C -5A -5A -5A Number of inputs 16 32 32 32 64 8 8 8 Removable terminal block DB37 connector Latch connector Removable terminal block Connector type Input type Digital input Input form Direct current (sinking or sourcing) 24 V DC 5 mA 24 V DC 3.2 mA 24 V DC 5 mA Input current Action OFF→ON >15 V DC level ON→OFF Response OFF→ON 10 ms±10% time ON→OFF 15 ms±10% Maximum input 50 Hz frequency