AH500 Operation Manual 11-78 Device Name R/W Description Modbus. connection is enabled and the master accesses data from slave 27. SM1779 COM2 is exchanging data with slave 28 by Modbus. R ON: when the Modbus connection is enabled and the master accesses data from slave 28. SM1780 COM2 is exchanging data with slave 29 by Modbus. R ON: when the Modbus connection is enabled and the master accesses data from slave 29. SM1781 COM2 is exchanging data with slave 30 by Modbus. R ON: when the Modbus connection is enabled and the master accesses data from slave 30. SM1782 COM2 is exchanging data with slave 31 by Modbus. R ON:
when the Modbus connection is enabled and the master accesses data from slave 31. SM1783 COM2 is exchanging data with slave 32 by Modbus. R ON: when the Modbus connection is enabled and the master accesses data from slave 32. SM1784 An error occurs when COM2 reads data from slave 1 by Modbus. R ON: when the Modbus connection is enabled and an error occurs in the reading of data from slave 1. SM1785 An error occurs when COM2 reads data from slave 2 by Modbus. R ON: when the Modbus connection is enabled and an error occurs in the reading of data from slave 2. SM1786 An error occurs when COM2 reads data from slave 3 by Modbus. R ON:
when the Modbus connection is enabled and an error occurs in the reading of data from slave 3. SM1787 An error occurs when COM2 reads data from slave 4 by Modbus. R ON: when the Modbus connection is enabled and an error occurs in the reading of data from slave 4. SM1788 An error occurs when COM2 reads data from slave 5 by Modbus. R ON: when the Modbus connection is enabled and an error occurs in the reading of data from slave 5. SM1789 An error occurs when COM2 reads data from slave 6 by Modbus. R ON: when the Modbus connection is enabled and an error occurs in the reading of data from slave 6. SM1790 An error occurs when COM2 reads data from slave 7 by Modbus. R ON:
when the Modbus connection is enabled and an error occurs in the reading of data from slave 7. SM1791 An error occurs when COM2 reads data from slave 8 by Modbus. R ON: when the Modbus connection is enabled and an error occurs in the reading of data from slave 8. Device Name R/W Description