Chapter 2 Specifications and System Configuratio n AH32AM10N-5A/AH32AN02T-5A/AH32AN02P-5A 24VDC 5mA 12~24VDC 0.1A 12~24VDC 0.1A 12~24VDC 0.1A 12~24VDC 0.1A 2-14 Number Name Description terminal block The outputs are connected to a load which will be driven, e.g. a contact, or a solenoid valve.
Arrangement of the 4 input/output Arrangement of the terminals terminals Description of the 5 Number of inputs/outputs and specifications inputs/outputs 6 Label Nameplate 7 Clip Fixing the removable terminal block 8 Set screw Fixing the module 9 Connector Connecting the module and a backplane 10 Projection Fixing the module 1 2 3 32AM10N 0 1 2 3 4 5 6 7 8 910 11 12131415 0 1 2 3 4 5 6 7 8 910 11 12131415 0 1 0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 S/S S/S S/S S/S 32AN02P 0 1 2 3 4 5 6 7 8 9101112131415 0 1 2 3 4 5 6 7 8 9101112131415 0 1 0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 32AN02T 0 1 2 3 4 5 6 7 8 910 11 12131415 0 1 2 3 4 5 6 7 8 910 11 121314 15 0 1 0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 UP UP UP UP ZP ZP ZP ZP 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 UP UP UP UP ZP ZP ZP ZP 8 9 10 11 12 13 14 15 UP UP ZP ZP 5 6 7 Number Name Description 1 Model name Model name of the module Input/Output LED If there is an input signal, the input LED indicator is ON.
2 indicator If there is an output signal, the output LED indicator is ON. The inputs are connected to a switch or a sensor. Removable 3 The outputs are connected to a load which will be driven, e.g. a contact, terminal block or a solenoid valve. Description of the 4 Number of inputs/outputs and specifications inputs/outputs 5 Set screw Fixing the module 6 Label Nameplate 7 Projection Fixing the module