Delta Electronics AH500 — 11.3.2.3 MODBUS TCP Data Exchange - Downloading/Uploading Parameters

Chapter 11 Convenient Functions *2. Please refer to section 11.3.3 for more information about setting flags. 11.3.2.3 MODBUS TCP Data Exchange - Downloading/Uploading Parameters *1. The mode selected will be executed only if the Enable checkbox in the window used to set an item is selected. After users set data exchange blocks, they have to download the parameters which are set to the PLC used. This section briefly introduces the downloading/uploading of the parameters set. Please refer to chapter 3 in ISPSoft User Manual for more information. Before the users download the parameters which are set, they have to make sure that ISPSoft connects to the PLC used normally.

Please refer to section 2.4 in ISPSoft User Manual for more information.  AH500 basic CPU series (AHCPU500/510/520/530) After the users click in the upper left corner of the PLC Parameter Setting window, parameters set will be downloaded. After the users click in the upper left corner of the PLC Parameter Setting window, parameters in the PLC used will be uploaded. After the users select the Ethernet-Advance checkbox, and click OK in the Transfer Setup window, the parameters related to the Ethernet-Advance checkbox will be downloaded or uploaded, including the parameters related to the data exchange set in the previous section.

11-93 Mode Description Program Control The execution of the data exchange is enabled or disabled by means of setting flags*2. If the flags are set to ON, the execution of the data exchange will be enabled. PLC Run When the PLC runs, the data exchange is executed. Always Enable The data exchange is executed whether the PLC runs or stops.