Delta Electronics AH500 — 12.2.2 ERROR LED Indicator’s Blinking

AH500 Operation Manual 12-10 16#202B The execution of RSTEF is abnormal. (SM102/103) Refer to AH500 Programming Manual, and check the instruction RSTEF. 16#202C | 16#204B I/O interrupt service routine 0-31 does not exist. Download I/O interrupt service routine 0-31 (I/O interrupt 0-31). 16#2054 | 16#2127 I/O interrupt service routine 40-251 does not exist. Download I/O interrupt service routine 40-251 (I/O interrupt 40-251). 16#2128 An action in a sequential function chart is incorrectly assigned qualifiers related to time. (SM0/SM1) Check whether the action in the sequential function chart is assigned qualifiers related to time.

16#2129 The modifier R is assigned to an action in a sequential function chart incorrectly. (SM0/SM1) Check whether the reset modifier assigned to the action in the sequential function chart conflicts with another modifier assigned to the action in the sequential function chart. 16#6001 Illegal IP address (SM1107) 1. Check the program and the related special data registers. 2. Set the Ethernet parameter for the CPU module in HWCONFIG again. 16#6002 Illegal netmask address (SM1107) 1. Check the program and the related special data registers. 2. Set the Ethernet parameter for the CPU module in HWCONFIG again. 16#6003 Illegal gateway mask (SM1107) 1.

Check the program and the related special data registers. 2. Set the Ethernet parameter for the CPU module in HWCONFIG again. 16#6004 The IP address filter is set incorrectly. (SM1108) Set the Ethernet parameter for the CPU module in HWCONFIG again. 16#6006 The static ARP table is set incorrectly. (SM1108) Set the Ethernet parameter for the CPU module in HWCONFIG again. 16#6007 The NTP client service is set incorrectly. (SM1380) Check the setting of the NTP client service, and download it again. 16#6008 Illegal network number (SM1107) Check the network configuration in NWCONFIG, and download it again.

16#6009 Illegal node number (SM1107) Check the network configuration in NWCONFIG, and download it again. 16#6101 The trigger in the email is set incorrectly. (SM1112) Set the Ethernet parameter for the CPU module in HWCONFIG again. 16#6102 The interval of sending the email is set incorrectly. (SM1112) Set the Ethernet parameter for the CPU module in HWCONFIG again. 16#6103 The device containing the data specified as the attachment exceeds the device range. (SM1112) Set the Ethernet parameter for the CPU module in HWCONFIG again. 16#6106 The SMTP server address is incorrect. (SM1112) Make sure that the address is correct, and set the Ethernet parameter for the CPU module in HWCONFIG again.

16#6108 SMTP authentication error (SM1112) Check the user name, and the password. Set the Ethernet parameter for the CPU module in HWCONFIG again. 16#6110 The SMTP server needs to be authenticated. (SM1112) Check the user name, and the password. Set the Ethernet parameter for the CPU module in HWCONFIG again.