Delta Electronics AH500 — 12.3.1 Troubleshooting for Analog I/O Modules and Temperature Measurement Modules

AH500 Operation Manual 12.3.1 Troubleshooting for Analog I/O Modules and Temperature Measurement Modules 12-30 Error Description Remedy code 16#A000 The signal received by channel 0 exceeds the range of inputs which can be received by the hardware. (The ERROR LED indicator blinks.) Check the module parameter in HWCONFIG. Check whether the signal received by channel 0 exceeds the range of inputs which can be received by the hardware. 16#A001 The signal received by channel 1 exceeds the range of inputs which can be received by the hardware. (The ERROR LED indicator blinks.) Check the module parameter in HWCONFIG.

Check whether the signal received by channel 1 exceeds the range of inputs which can be received by the hardware. 16#A002 The signal received by channel 2 exceeds the range of inputs which can be received by the hardware. (The ERROR LED indicator blinks.) Check the module parameter in HWCONFIG. Check whether the signal received by channel 2 exceeds the range of inputs which can be received by the hardware. 16#A003 The signal received by channel 3 exceeds the range of inputs which can be received by the hardware. (The ERROR LED indicator blinks.) Check the module parameter in HWCONFIG.

Check whether the signal received by channel 3 exceeds the range of inputs which can be received by the hardware. 16#A004 The signal received by channel 4 exceeds the range of inputs which can be received by the hardware. (The ERROR LED indicator blinks.) Check the module parameter in HWCONFIG. Check whether the signal received by channel 4 exceeds the range of inputs which can be received by the hardware. 16#A005 The signal received by channel 5 exceeds the range of inputs which can be received by the hardware. (The ERROR LED indicator blinks.) Check the module parameter in HWCONFIG.

Check whether the signal received by channel 5 exceeds the range of inputs which can be received by the hardware. 16#A006 The signal received by channel 6 exceeds the range of inputs which can be received by the hardware. (The ERROR LED indicator blinks.) Check the module parameter in HWCONFIG. Check whether the signal received by channel 6 exceeds the range of inputs which can be received by the hardware. 16#A007 The signal received by channel 7 exceeds the range of inputs which can be received by the hardware. (The ERROR LED indicator blinks.) Check the module parameter in HWCONFIG.

Check whether the signal received by channel 7 exceeds the range of inputs which can be received by the hardware. 16#A400 The signal received by channel 0 exceeds the range of inputs which can be received by the hardware. (The ERROR LED indicator is ON.) Check the module parameter in HWCONFIG. Check whether the signal received by channel 0 exceeds the range of inputs which can be received by the hardware. 16#A401 The signal received by channel 1 exceeds the range of inputs which can be received by the hardware. (The ERROR LED indicator is ON.) Check the module parameter in HWCONFIG.

Check whether the signal received by channel 1 exceeds the range of inputs which can be received by the hardware.