AH500 Programming Manual Additional remark: 1. If the device exceeds the range, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#2003. 2. If the divisor is 0, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#2012. 3. If the operand D used during the execution of the 16-bit instruction is declared in ISPSoft, the data type will be ARRAY [2] of WORD/INT. 4. If the operand D used during the execution of the 32-bit instruction is declared in ISPSoft, the data type will be ARRAY [2] of DWORD/DINT. 6-44