Chapter 6 Applied Instructions D11 D12 D10 D12 D11 D10 D10 D10>D11 The number of scan cycle is n. The number of scan cycle is n. The number of scan cycle is stored in D13. Additional remark: 1. If D +1 exceeds the device range, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#2003. 2. If n is less than 0, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#200B. 3. If users declare the operand D in ISPSoft, the data type will be ARRAY [2] of WORD/INT. 4. When SM686 is ON/OFF, the value in D12 changes as follows. SM686=ON SM686=OFF X0.0 X0.0 The signal is enabled. The signal is enabled. D11 D11 D10 D12 D10 D12 SM687 SM687 6-163