Chapter 6 Applied Instructions (D0+D1+D2) D10 D0 100 D1 113 D10 After the instruction is executed 338 D2 125 1. If n used in the 16-bit instruction is less than 1 or larger than 256, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#200B. 2. If n used in the 32-bit instruction is less than 1 or larger than 128, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#200B. 3. If S + n -1 or D exceeds the device range, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#2003. Additional remark: 6-295