AH500 Programming Manual API 1220 Symbol: D ： Device number Bit/Word n ： Length Word Explanation: 1. The instruction is used to clear the values in D ~ D +( n -1). 2. The operand n should be within the range between 1 and 1024. Example: 1. When X0.0 is ON, the auxiliary relays M300~M399 are reset to OFF. 2. When X0.1 is ON, the counters C0~C127 are reset. (The values of C0~C127 are cleared to 0, and the contact and the coil are reset to OFF.) 3. When X0.2 is ON, the timers T0~T127 are reset. (The values of T0~T127 are cleared to 0. and the contact and the coil are reset to OFF.) 4. When X0.3 is ON, the stepping relays S0~S127 are reset to OFF. 5.
When X0.4 is ON, the output relays Y0.0~Y1.15 are reset to OFF. 6. When X0.5 is ON, the counters HC0~HC63 are reset. (The values of HC0~HC63 are cleared to 0, and the contact and the coil are reset to OFF.) 6-298 Instruction code Operand Function BKRST P D, n Resetting the specified zone Device X Y M S T C HC D L SM SR E PR K 16# “$” DF D n Pulse instruction 16-bit instruction (5 steps) 32-bit instruction AH500 AH500 -