AH500 Programming Manual S +2 respectively. 2. If the value in S is not a binary-coded decimal value (The binary-coded decimal value is represented by the hexadecimal number, but one of digits is not within the range between 0 and 9.), the operation error occurs, SM0 is ON, and the error code in SR0 is 16#200D. 3. The value specified by the operand S should be within the range between –1.0 and +1.0. If the value specified by the operand S is not within the range, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#2003. 4. If users declare the operand S in ISPSoft, the data type will be ARRAY [3] of WORD/IN. 6-360