AH500 Programming Manual 2-48 Limited Special auxiliary Refresh time to relay SM1185 SM1185 is ON when the trigger is enabled and the attachment is not found. SM1186 SM1186 is ON when the trigger of the PLC parameter is enabled. SM1187 SM1187 is ON when the trigger of the PLC parameter is triggered. SM1188 SM1188 is ON when the trigger is enabled and no mail has been sent. SM1189 SM1189 is ON when the trigger is enabled and the last mail has been sent successfully. SM1190 SM1190 is ON when the trigger is enabled and the last mail has been sent in error. SM1191 SM1191 is ON when the trigger is enabled and the mail has been sent.
SM1192 SM1192 is ON when the trigger is enabled and there is an SMTP server response timeout. SM1193 SM1193 is ON when the trigger is enabled and there is an SMTP server response error. SM1194 SM1194 is ON when the trigger is enabled and the size of the attachment exceeds the limit. SM1195 SM1195 is ON when the trigger is enabled and the attachment is not found. SM1196 SM1196 is ON when there is a socket configuration error. SM1270 ↓ SM1373 The flag is refreshed when the socket function is executed. SM1374 ↓ SM1390 Users set SM1374 to ON and reset it to OFF. AH5×0 SM1392 ↓ SM1423 SM1392 is ON when the PLC Link is enabled and the master connects to slave 1~32.
AH5×1 SM1392 is ON when the COM2-Modbus connection is enabled and the master connects to slave 1~32. AH5×0 SM1424 ↓ SM1455 SM1424 is ON when the PLC Link is enabled and the master accesses the data in slave 1~32. AH5×1 SM1424 is ON when the COM1-Modbus connection is enabled and the master accesses data from slave 1~32. AH5×0 SM1456 ↓ SM1487 SM1456 is ON when the PLC Link is enabled and an error occurs in the reading of the data from slave 1~32. AH5×1 SM1456 is ON when the COM1-Modbus connection is enabled and an error occurs in the reading of data from slave 1~32. AH5×0 SM1488 ↓ SM1519 SM1488 is ON when the PLC Link is enabled and an error occurs in the writing of the data into slave 1~32.
AH5×1 SM1488 is ON when the COM1-Modbus connection is enabled and an error occurs in the writing of data to slave 1~32. AH5×0 SM1520 ↓ SM1551 SM1520 is ON when the PLC Link is enabled and the master finishes reading the data from slave 1~32. AH5×1 SM1520 is ON when a Modbus connection is enabled for COM1 and the master finishes reading data from slave 1~32. AH5×0 SM1552 ↓ SM1583 SM1552 is ON when the PLC Link is enabled and the master finishes writing the data into slave 1~32. AH5×1 SM1552 is ON when a Modbus connection is enabled for COM1 and the master finishes writing data to slave 1~32.