AH500 Programming Manual If the values in D10 and D11 are 5 and 1 respectively, the execution result is as follows. D0 b15 b0 b7 b8 b15 b0 b7 b8 D2 D1 16#36(6) 37(7) 16# D21 D20 D3 After the instruction is executed 00 16# D10 5 D11 1 Additional remark: 1. If the string in S 1 does not end with 16#00, SM0 is ON, and the error code in SR0 is 16#200E. 2. If the value in S 2 is less than 0, the value in S 3 is less than or equal to 0, or the value in S 3 is larger than the length of the string in S 1 , SM0 is ON, and the error code in SR0 is 16#2003. 6-492 16#32(2) 16#31(1) 16#34(4) 16#33(3) 16#36(6) 16#35(5) 16#00 16#37(7)