AH500 Programming Manual 7-12 Error code Description CPU Status LED indicator status ERROR BUS FAULT 16#9A02 The setting of the data exchange for slave 2 in the PLC Link / COM1 MODBUS is incorrect. (SM1590) Continue Keep Keep 16#9A03 The setting of the data exchange for slave 3 in the PLC Link / COM1 MODBUS is incorrect. (SM1590) Continue Keep Keep 16#9A04 The setting of the data exchange for slave 4 in the PLC Link / COM1 MODBUS is incorrect. (SM1590) Continue Keep Keep 16#9A05 The setting of the data exchange for slave 5 in the PLC Link / COM1 MODBUS is incorrect. (SM1590) Continue Keep Keep 16#9A06 The setting of the data exchange for slave 6 in the PLC Link / COM1 MODBUS is incorrect.
(SM1590) Continue Keep Keep 16#9A07 The setting of the data exchange for slave 7 in the PLC Link / COM1 MODBUS is incorrect. (SM1590) Continue Keep Keep 16#9A08 The setting of the data exchange for slave 8 in the PLC Link / COM1 MODBUS is incorrect. (SM1590) Continue Keep Keep 16#9A09 The setting of the data exchange for slave 9 in the PLC Link / COM1 MODBUS is incorrect. (SM1590) Continue Keep Keep 16#9A0A The setting of the data exchange for slave 10 in the PLC Link / COM1 MODBUS is incorrect. (SM1590) Continue Keep Keep 16#9A0B The setting of the data exchange for slave 11 in the PLC Link / COM1 MODBUS is incorrect.
(SM1590) Continue Keep Keep 16#9A0C The setting of the data exchange for slave 12 in the PLC Link / COM1 MODBUS is incorrect. (SM1590) Continue Keep Keep 16#9A0D The setting of the data exchange for slave 13 in the PLC Link / COM1 MODBUS is incorrect. (SM1590) Continue Keep Keep 16#9A0E The setting of the data exchange for slave 14 in the PLC Link / COM1 MODBUS is incorrect. (SM1590) Continue Keep Keep 16#9A0F The setting of the data exchange for slave 15 in the PLC Link / COM1 MODBUS is incorrect. (SM1590) Continue Keep Keep 16#9A10 The setting of the data exchange for slave 16 in the PLC Link / COM1 MODBUS is incorrect.
(SM1590) Continue Keep Keep 16#9A11 The setting of the data exchange for slave 17 in the PLC Link / COM1 MODBUS is incorrect. (SM1590) Continue Keep Keep 16#9A12 The setting of the data exchange for slave 18 in the PLC Link / COM1 MODBUS is incorrect. (SM1590) Continue Keep Keep