AH500 Programming Manual Symbol: S 1 ： Matrix source 1 Word S 2 ： Matrix source 2 Word D ： Operation result Word n ： Length of the array Word Explanation: 1. The operator XNR takes the n rows of binary representations in S 1 and the n rows binary representations in of S 2 , and performs the matrix exclusive NOR operation on each pair of corresponding bits. The operation result is stored in D . 2. The result in each position is 1 if the two bits are the same, and 0 if they are different. 3. The operand n should be within the range between 1 and 256. Example:
When X0.0 is ON, the operator XNR takes the data in the 16-bit devices Y0~Y2 and the data in 16-bit devices Y10~Y12, and performs the matrix exclusive NOR operation on each pair of corresponding bits. The operation result is stored in the 16-bit devices Y20~Y22. After the instruction is executed Before the instruction is executed Additional remark: 1.
If S 1 +n-1 , S 2 +n-1 , or D+n-1 exceeds the device range, the instruction is not executed, SM0 is 6-193 API Instruction code Operand Function 0807 MXNR P S , S , D, n 1 2 Matrix exclusive NOR operation Device X Y M S T C HC D L SM SR E PR K 16# “$” DF S 1 S 2 D n Pulse instruction 16-bit instruction (9 steps) 32-bit instruction AH AH － S1 b15 b0 Y0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 Y1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 Y2 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 S2 b15 MXNR b0 Y100 0 0 1 0 1 1 1 1 0 1 0 0 1 0 1 Y11 0 0 0 1 0 1 1 1 1 0 1 0 0 1 0 1 Y120 0 0 1 0 0 1 1 1 0 1 0 0 1 0 1 0 0 0 1 0 1 1 1 1 0 1 0 0 1 0 1 0 0 0 1 0 1 1 1 1 0 1 0 0 1 0 1 0 0 0 1 0 0 1 1 1 0 1 0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 D b15 b0 Y201 0 1 0 0 1 0 1 0 0 0 0 1 1 1 1 Y211 0 1 0 0 1 0 1 0 0 0 0 1 1 1 1 Y221 0 1 0 0 1 0 1 0 0 0 0 1 1 1 1 1 0 1 0 0 1 0 1 0 0 0 0 1 1 1 1 1 0 1 0 0 1 0 1 0 0 0 0 1 1 1 1 1 0 1 0 0 1 0 1 0 0 0 0 1 1 1 1