AH500 Programming Manual 7.1.4 AH10PM-5A 7-16 Error code Description LED indicator status CPU Module BUS ERROR FAULT 16#A002 The prescale value for channel 1 exceeds the range. Blink 16#A003 The moving average for channel 1 exceeds the range. Blink 16#A004 The comparison value for channel 1 exceeds the range. Blink 16#A005 The limit value of the alarm output for channel 1 is incorrect. Blink 16#A006 The interrupt number for channel 1 exceeds the range. Blink 16#A011 The linear accumulation in channel 2 exceeds the range. Blink 16#A012 The prescale value for channel 2 exceeds the range. Blink 16#A013 The moving average for channel 2 exceeds the range.
Blink 16#A014 The comparison value for channel 2 exceeds the range. Blink 16#A015 The limit value of the alarm output for channel 2 is incorrect. Blink 16#A016 The interrupt number for channel 2 exceeds the range. Blink 16#A021 The linear accumulation in channel 3 exceeds the range. Blink 16#A022 The prescale value for channel 3 exceeds the range. Blink 16#A023 The moving average for channel 3 exceeds the range. Blink 16#A024 The comparison value for channel 3 exceeds the range. Blink 16#A025 The limit value of the alarm output for channel 3 is incorrect. Blink 16#A026 The interrupt number for channel 3 exceeds the range. Blink 16#A031 The linear accumulation in channel 4 exceeds the range.
Blink 16#A032 The prescale value for channel 4 exceeds the range. Blink 16#A033 The moving average for channel 4 exceeds the range. Blink 16#A034 The comparison value for channel 4 exceeds the range. Blink 16#A035 The limit value of the alarm output for channel 4 is incorrect. Blink 16#A036 The interrupt number for channel 4 exceeds the range. Blink Error code Description LED indicator status CPU Module BUS Error FAULT 16#A002 The subroutine has no data. Blink 16#A003 CJ, CJN, and JMP have no matching pointers. Blink 16#A004 There is a subroutine pointer in the main program. Blink 16#A005 Lack of the subroutine Blink 16#A006 The pointer is used repeatedly in the same program.
Blink 16#A007 The subroutine pointer is used repeatedly. Blink 16#A008 The pointer used in JMP is used repeatedly in different subroutines. Blink 16#A009 The pointer used in JMP is the same as the pointer used in CALL. Blink 16#A00B Target position (I) of the single speed is incorrect. Blink 16#A00C Target position (II) of the single-axis motion is incorrect. Blink