Chapter 2 0BProgramming Project management area: The framework of the project is displayed in this area. Users can understand the relation among the objects on the basis of the tree structure. The efficiency in managing the project is also increased. Work area: The editing work is in this area. Output area: The information resulting from the execution of the function is displayed in this area. Status area: The project and the communication information are displayed in this area. 2.6 Hardware Configuration After the project is created, users can configure the hardware. Suppose the configuration is as follows.
Digital input module 16AM10N-5A/16AM30N-5A (16 inputs) X0.0~X0.15 Digital output module 16AN01R-5A/16AN01T-5A/16AN01P-5A/16AN01S-5A (16 outputs) Y0.0 ~ Y0.15 Four-channel analog input module AH06XA-5A D0~D7 Two-channel analog output module AH06XA-5A D100~D103 The water level inside the underground pool is low. X0.0 The water level inside the water tower is low. X0.2 The water level inside the water tower is high. X0.3 Remote control of the pump X0.5 The pump runs. X0.6 The pump trips. X0.7 The pump starts. Y0.0 Water level inside the underground pool D0 With the information above, users can configure the hardware practically.
Double-click in the window at the left side of the main screen of the software to open the configuration window. 2-13