When installing a drive in the 5 inch bay Bracket (L) PC IO P7 P8 P2 PC IO AD_DA P23 PC CPU Cable connections Connecting the flat cable 1. Remove two screws from the cover that conceals the PC CPU board. When you remove the cover, you will see the P2 connector for the ATA drive. Bracket (S) PC IO AD_DA P2 P7 P8 Step 1 PC IO PC CPU 2. 3Insert the blue connector of the included flat cable into the P2 connector of the PC CPU board. 3. Reattach the cover that you removed. 4. Connect the other end of the flat cable to the drive. SERVICE MANUAL 30