EPSON — FX Menu

AL-C300 Series User's Guide Getting to Know Your Printer FX Menu 32 Item Explanation Bit Image The printer is able to emulate the graphics densities set with the printer commands. If you select Dark, the bit image density is high, and if you select Light, the bit image density is low. If you select BarCode, the printer converts bit images to bar codes by automatically filling in any vertical gaps between dots. This produces unbroken vertical lines that can be read by a bar code reader. This mode will reduce the size of the image being printed, and may also cause some distortion when printing bit image graphics. Settings (default in bold):

Dark, Light, BarCode ZeroChar Specifies whether the printer prints a slashed or unslashed zero. Settings (default in bold): 0, (or the zero character with a slash) Item Explanation Font Selects the font. Settings (default in bold): Courier, Prestige, Roman, Sans serif, Script, Orator S, OCR A, OCR B Pitch Selects the pitch (the horizontal spacing) of the font in fixed pitch, measured in cpi (characters per inch). You can also choose proportional spacing. Settings (default in bold): 10 cpi, 12cpi, 15cpi, Prop. Condensed Turns condensed printing on or off. Settings (default in bold): Off, On T.Margin Sets the distance from the top of the page to the baseline of the first printable line.

The distance is measured in inches. The smaller the value, the closer the printable line is to the top. Settings (default in bold): 0.40 ... 0.50 ... 1.50 inch in 0.05-inch increments Text Sets the page length in lines. For this option, a line is assumed to be 1 pica (1/6 inch). If you change the Orientation, Page Size, or T.Margin settings, the page length setting automatically returns to the default for each paper size. Settings (default in bold): 1 ... 66 Lines