AL-C300 Series User's Guide Getting to Know Your Printer 34 Item Explanation Pitch Selects the pitch (the horizontal spacing) of the font in fixed pitch, measured in cpi (characters per inch). You can also choose proportional spacing. Settings (default in bold): 10 cpi, 12cpi, 15cpi, 17cpi, 20cpi, 24cpi, Prop. Code Page Selects the character tables. Character tables contain the characters and symbols used by different languages. The printer prints text based on the selected character table. Settings (default in bold): 437, 850, 858, 860, 863, 865 T.Margin Sets the distance from the top of the page to the baseline of the first printable line. The distance is measured in inches.
The smaller the value, the closer the printable line is to the top. Settings (default in bold): 0.30 ... 0.40 ... 1.50 inch in 0.05-inch increments Text Sets the page length in lines. For this option, a line is assumed to be 1 pica (1/6 inch). If you change the Orientation, Page Size, or T.Margin settings, the page length setting automatically returns to the default for each paper size. Settings (default in bold): 1 ... 67 Lines Auto CR Specifies whether the printer performs a carriage-return/line-feed (CR-LF) operation whenever the printing position goes beyond the right margin.
If you select Off, the printer does not print any characters beyond the right margin and does not perform any line wrapping until it receives a carriage-return character. This function is handled automatically by most applications. Settings (default in bold): On, Off Auto LF If you select Off, the printer does not send an automatic line-feed (LF) command with each carriage-return (CR). If On is selected, a line-feed command is sent with each carriage-return. Select On if your text lines overlap. Settings (default in bold): Off, On Alt. Graphics Turns the Alternate Graphics option on or off. Settings (default in bold):
Off, On Bit Image The printer is able to emulate the graphics densities set with the printer commands. If you select Dark, the bit image density is high, and if you select Light, the bit image density is low. Settings (default in bold): Dark, Light