AL-C300 Series User's Guide Printing Tasks E Press the r Right button, then use the d Down and u Up buttons to select the number of copies. Note: If no print jobs have been saved with the password you entered, Wrong Password appears briefly on the LCD panel then the printer exits the control panel menus. Confirm the password and try again. To delete the print job without printing any copies, press the d Down button to display Delete on the LCD panel. Use the d Down or u Up button to scroll to the appropriate job name, then press the r Right button. F Press the r Right button to start printing or to delete the data. E F Use the d Down or u Up button to display Print .
Using Confidential Job Sending the print job A To delete the print job, press the d Down or u Up button to display Delete on the LCD panel. Click the More Options tab, then click Confidential Job . The Confidential Job Settings dialog box appears. G Press the r Right button to start printing or to delete the data. B Enter a four-digit number for Password. Printing with an overlay C Enter a user name and job name if necessary. Note: The OK button becomes available after the password has been entered. This function allows you to print documents onto form templates, which you register on your printer in advance. D Click OK . Note: ❏ This function is for Windows only.
Printing using the Confidential Job Menu A ❏ The application featured in these instructions is Microsoft WordPad. The actual procedure may differ slightly when printing from other applications. Make sure the LCD panel displays Ready , then press the r Right button to access the control panel menus. Creating an overlay B Press the d Down button repeatedly until ConfidentialJobMenu appears on the LCD panel, then press the r Right button. Note: You first need to install EPSON FormOverlayUTL utility to create overlay or underlay data. See “Installing Software” on page 56 for details. C Use the d Down or u Up button to scroll to the appropriate user name, then press the r Right button.
Follow the steps below to create the form data. A Open the data to be an overlay data using an application. D Enter your four-digit password. To enter the password, press the d Down or u Up button to select the character and press the r Right button to determine the character. After all characters are determined, press the r Right button. B Select Print from the File menu, select EPSON FormOverlayUTL , then click Preferences . 51