EPSON — Printer Adjust Menu

AL-MX300 Series User's Guide Adjusts the vertical position in which to start printing. The position moves lower on the sheet as the value increases. This setting is used when feeding the printed paper from the MP tray, C1, or C2. ScanOffsetMP , ScanOffsetC1 , ScanOffsetC2 Adjusts the vertical position in which to start printing. The position moves to the right of the sheet as the value increases. This setting is used when feeding the printed paper from the MP tray, C1, or C2. TR Plain1 , TR Plain2 , TR SemiThk , TR Labels , TR Thick , TR ExtraThck , TR Thick3 , TR Envelope Adjusts the density or image granularity for the Plain1, Plain2, Semi-Thick, Label, Thick, ExtraThick, Thick3, Envelope.

The setting becomes darker as the value increases. TEMP Plain1 , TEMP Plain2 , TEMP SemiThk , TEMP Labels1 , TEMP Thick , TEMP ExtraThck , TEMP Thick3 , TEMP Envelope Adjusts the fixing temperature for the Plain1, Plain2, Semi-Thick, Labels1, Thick, ExtraThick, Thick3, Envelope. The setting becomes hotter as the value increases. Note that the curl of printouts could increase as the value increases. Highland Adjust this setting if black dots appear on the printed page when using the printer in locations at high altitudes. See the table below and select a suitable value according to the location the printer is being used. BTR Cleaning Cleans the transfer roller.

This may eliminate stains that appear on the backside of printed paper documents. Do not turn off the printer until the LCD panel displays Ready . Dev Refresh Using the Control Panel 166 Value Altitude 0 0 m 2 1000 m 4 2000 m 6 3000 m