EPSON — Status and Error Messages

AL-MX300 Series User's Guide The photoconductor unit has reached the end of its service life and needs to be replaced. For details about replacement, see the instructions that come with the photoconductor unit. Replace Toner Cartridge The toner cartridge has reached the end of its service life and need to be replaced. For details about replacement, see the instructions that come with the toner cartridge. Reserve Job Canceled The printer cannot store the data of your print job using the Reserve Job function. The maximum number of print jobs stored on the printer’s memory has been reached, or the memory has no more memory available to store a new job.

To store a new print job, delete a previously stored job. Also, if you have any Confidential Jobs stored, printing those jobs will make more memory available. You may also increase the available memory space by changing the RAM Disk setting to Normal or Maximum . For details, see “Setup Menu” on page 131. To clear this error, select Clear Warning from Reset Menu in the Common Settings menu. See “Accessing the each menu” on page 126 for instructions. Reset All All Printer Settings have been reset to the default configuration, or to the last settings that were saved. ROM CHECK The printer is checking the ROM. Scanner Error Cannot Be Executed An error occurred in the scanner unit.

Turn off the printer, and then turn it on again several minutes later. If the error occurs again, contact your dealer or a qualified customer support person for assistance. Scanner Error Unable to Scan / Scanner Error Unable to Copy An error occurred in the scanner unit. Turn off the printer, wait several minutes and then turn it on again. Searching Files The printer is searching files in the USB memory. Using the Control Panel 178