AL-MX300 Series User's Guide Insufficient memory to print all copies Paper Handling Problems Paper does not feed properly Troubleshooting 233 Cause What to do The printer does not have sufficient memory to collate print jobs. Reduce the contents of print jobs or lower print quality in the printer driver. When RAM Disk is set to Maximum or Normal on the control panel, you can increase the available memory space by changing this setting to Off. Cause What to do The paper guides are not set correctly. Make sure that the paper guides in all the paper cassettes and the MP tray are set to the correct paper size positions. The paper source setting may not be correct.
Make sure that you have selected the correct paper source in your application. There may be no paper in the paper source. Load paper into the selected paper source. The size of loaded paper differs from the control panel or printer driver settings. Make sure that the correct paper size and paper source are set in the control panel or printer driver. Too many sheets may be loaded in the MP tray or paper cassettes. Make sure that you have not tried to load too many sheets of paper. For the maximum paper capacity for each paper source, see “General” on page 269. If paper does not feed from the optional paper cassette unit, the unit may not be installed properly.
For instructions on installing the unit, see “Optional Paper Cassette Unit” on page 187. The pickup roller is dirty. Clean up the pickup roller. For instructions, see “Cleaning the pickup roller” on page 197. The extra-thick paper that is loaded may have the following problems: - The paper is too stiff - The paper is too smooth - The paper is curled Feed a paper from the standard lower paper cassette. When the paper is 279 mm or longer vertically, set 2 in the Special setting of the Printer Adjust Menu, set the Paper Type setting to Special in the printer driver, then try to print again. See “Printer Adjust Menu” on page 163 for details.