AL-MX300 Series User's Guide 3. For WIndows 8 or 8 x64, right-click the bottom left corner of the screen, select Control Panel , click View devices and printers , then click Add a printer button. For Windows 7 or 7 x64, click the start button, select Devices and Printers , and click the Add a printer button. For Windows Vista, Vista x64, XP, XP x64, Server 2008, or Server 2008 x64, click Start , point to Printer and Faxes , and click Add a printer in the Printer Tasks menu. For Windows 2000, Server 2003, or Server 2003 x64, click Start , point to Settings , and click Printers . Then double-click the Add Printer icon. The Add Printer Wizard appears. 4.
For Windows 8, 8 x64, 7, 7 x64, Vista, Vista x64, Server 2012, Server 2008, or Server 2008 x64, select Add a local printer . For Windows XP, XP x64, 2000, Server 2003, click Next to proceed the next screen, select Local printer , then click Next . Note: Do not select the Automatically detect and install my Plug and Play printer check box. 5. Select USB as the port the printer is connected to, then click Next . 6. Click Have Disk and specify the following path for the Software Disc. If your CD/DVD drive is D:, the path will be D:\Driver\PostScript\ \eppsnt.inf. Then click OK . Note: Change the drive letter as needed for your system. 7. Select the printer, then click Next . 8.
Follow the on-screen instructions for the rest of the installation. 9. When installation is done, click Finish . Installing the PostScript printer driver for the network interface Note: ❏ Set the network settings before installing the printer driver. Refer to the Network Guide that comes with your printer for details. ❏ Turn off all virus protection programs before installing the printer software. 1. Make sure that the printer is turned on. Insert the printer Software Disc into your CD/DVD drive. About the Printer Software 262