EPSON — Using the PostScript printer driver with Mac OS X

AL-MX300 Series User's Guide 10. Follow the on-screen instructions for the rest of the installation. 11. When installation is done, click Finish . Accessing the PostScript printer driver You can change the PostScript printer driver settings in the PostScript printer driver. To access the printer driver, see “Accessing the printer driver” on page 251. Using the PostScript printer driver with Mac OS X Installing the PostScript printer driver Go to the following Epson support website to download and install the driver.

http://www.epson.eu/Support (Europe) http://support.epson.net/ (outside Europe) Selecting the printer After installing the PostScript 3 printer driver, you need to select the printer. In a network environment Note: ❏ You need to make the settings for your installed options manually when the printer is connected using USB, IP printing, or Bonjour. ❏ Make sure to specify ASCII as the data format in the application. 1. Open the System Preferences, and then double-click the Print & Fax ("Print & Scan" for Mac OS X 10.8 or 10.7) icon. The Print & Fax ("Print & Scan" for Mac OS X 10.8 or 10.7) window appears. 2. Click in the Printers window. 3.

Select the printer name that you are using from the printer name box. Note: If your printer is not listed, check that it is correctly connected to the computer and that the printer is on. 4. Click Add . About the Printer Software 264