EPSON — Sending scanned data by e-mail

AL-MX300 Series User's Guide Sending scanned data by e-mail 1. Press the Scan button. 2. Place your original either on the document table or in the Auto Document Feeder. For details on how to set your original, see “Setting Your Originals” on page 50. 3. Press the F3 button on the control panel. 4. Press the l or r button several times to select the Basic Setting tab and press the F1 button. 5. Press the F1 or F3 buttons to select the items and enter a destination e-mail address and subject. Note: A maximum of 255 characters can be entered for the destination e-mail address. 6. Press the OK button. Note:

If necessary, specify the desired settings, such as Basic Setting , File Setting , and Scan Setting . For details about each setting, see “Scan mode menu list” on page 80. Scanning 84 Item Description Address List Address Select a destination from the Address Book. Direct Enter the mail address directly. (Up to 64 characters) Delete Delete the selected address. Input Subject Input the e-mail subject. Reply Address Address Select a reply destination from the Address Book. Direct Enter the reply mail address directly. (Up to 64 characters) Delete Delete the selected reply address.