cisco Catalyst 9300 — Enabling the VTP Version

In VTP version 3, both the primary and secondary servers can exist on an instance in the domain. Caution Procedure Configuring VTP Enabling the VTP Version Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. Enter your password if prompted. Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Step 3 vtp version {1 | 2 | 3} Example: Device(config)# vtp version 2 Enables the VTP version on the device. The default is VTP version 1. Step 4 end Example: Device(config)# end Returns to privileged EXEC mode. Step 5 show vtp status Example: Device# show vtp status Verifies that the configured VTP version is enabled.

Step 6 copy running-config startup-config Example: Device# copy running-config startup-config (Optional) Saves your entries in the configuration file. VLAN Configuration Guide, Cisco IOS XE 17.16.x (Catalyst 9300 Switches) 14