cisco Catalyst 9300 — Creating an Extended-Range VLAN

How to Configure Extended-Range VLANs Extended-range VLANs enable service providers to extend their infrastructure to a greater number of customers. The extended-range VLAN IDs are allowed for any switchport commands that allow VLAN IDs. With VTP version 1 or 2, extended-range VLAN configurations are not stored in the VLAN database, but because VTP mode is transparent, they are stored in the device running configuration file, and you can save the configuration in the startup configuration file. Extended-range VLANs created in VTP version 3 are stored in the VLAN database.

You can change only the MTU size, private VLAN, and the remote SPAN configuration state on extended-range VLANs; all other characteristics must remain at the default state. Creating an Extended-Range VLAN Procedure Configuring VLANs How to Configure Extended-Range VLANs Command or Action Purpose Step 8 show interfaces interface-id switchport Example: Device# show interfaces gigabitethernet2/0/1 switchport Verifies your entries in the Administrative Mode and the Access Mode VLAN fields of the display. Step 9 copy running-config startup-config Example: Device# copy running-config startup-config (Optional) Saves your entries in the configuration file.

Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. Enter your password if prompted. Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. VLAN Configuration Guide, Cisco IOS XE 17.16.x (Catalyst 9300 Switches) 32