cisco Catalyst 9300 — Configuring Cisco IP Phone Voice Traffic

Configuring Voice VLANs Configuring Cisco IP Phone Voice Traffic Command or Action Purpose Step 4 switchport voice vlan {vlan-id | dot1p | none | untagged} Example: Device(config-if)# switchport voice vlan dot1p Configures the voice VLAN. • vlan-id—Configures the phone to forward all voice traffic through the specified VLAN. By default, the Cisco IP Phone forwards the voice traffic with an IEEE 802.1Q priority of 5. Valid VLAN IDs are 1 to 4094. • dot1p—Configures the device to accept voice and data IEEE 802.1p priority frames tagged with VLAN ID 0 (the native VLAN). By default, the device drops all voice and data traffic tagged with VLAN 0.

If configured for 802.1p the Cisco IP Phone forwards the traffic with an IEEE 802.1p priority of 5. • none—Allows the phone to use its own configuration to send untagged voice traffic. • untagged—Configures the phone to send untagged voice traffic. Step 5 end Example: Device(config-if)# end Returns to privileged EXEC mode. Step 6 Use one of the following: • show interfaces interface-id switchport • show running-config interface interface-id Example: Device# show interfaces gigabitethernet1/0/1 switchport or Device# show running-config interface gigabitethernet1/0/1 Verifies your voice VLAN entries or your QoS and voice VLAN entries. Step 7 copy running-config startup-config Example:

(Optional) Saves your entries in the configuration file. VLAN Configuration Guide, Cisco IOS XE 17.16.x (Catalyst 9300 Switches) 41