Monitoring Voice VLAN To display voice VLAN configuration for an interface, use the show interfaces interface-id switchport privileged EXEC command. Where to Go Next After configuring voice VLANs, you can configure the following: • VLANs • VLAN Trunking • VTP Configuring Voice VLANs Monitoring Voice VLAN Command or Action Purpose • trust—Configures the phone access port to trust the priority received from the PC or the attached device. Step 5 end Example: Device(config-if)# end Returns to privileged EXEC mode. Step 6 show interfaces interface-id switchport Example: Device# show interfaces gigabitethernet1/0/1 switchport Verifies your entries.
Step 7 copy running-config startup-config Example: Device# copy running-config startup-config (Optional) Saves your entries in the configuration file. VLAN Configuration Guide, Cisco IOS XE 17.16.x (Catalyst 9300 Switches) 43