Where to Go Next After configuring VLAN trunks, you can configure the following: • VLANs • Voice VLANs • Private VLANs Additional References Related Documents Standards and RFCs Feature History for VLAN Tunks This table provides release and related information for features explained in this module. These features are available on all releases subsequent to the one they were introduced in, unless noted otherwise. Configuring VLAN Trunks Where to Go Next Related Topic Document Title For complete syntax and usage information for the commands used in this chapter.
Command Reference (Catalyst 9300 Series Switches) Standard/RFC Title RFC 1573 Evolution of the Interfaces Group of MIB-II RFC 1757 Remote Network Monitoring Management RFC 2021 SNMPv2 Management Information Base for the Transmission Control Protocol using SMIv2 Release Feature Feature Information Cisco IOS XE Everest 16.5.1a VLAN Trunks A trunk is a point-to-point link between one or more Ethernet interfaces and another networking device such as a router or a controller. Ethernet trunks carry the traffic of multiple VLANs over a single link, and you can extend the VLANs across an entire network. Cisco IOS XE Dublin 17.10.1b VLAN Trunks This feature was implemented on the C9500X-60L4D model.
VLAN Configuration Guide, Cisco IOS XE 17.16.x (Catalyst 9300 Switches) 61