Configuring a Layer 2 Interface as a Promiscuous Private VLAN Trunk Port on a Portchannel To configure a Layer 2 interface as a promiscuous private VLAN trunk port on a portchannel, perform this task: Procedure Configuring Private VLANs Configuring a Layer 2 Interface as a Promiscuous Private VLAN Trunk Port on a Portchannel Command or Action Purpose Step 7 end Example: Device(config)# end Returns to privileged EXEC mode. Step 8 show etherchannel summary Example: Device# show etherchannel summary Verifies the configuration. Step 9 copy running-config startup config Example: Device# copy running-config startup-config Saves your entries in the device startup configuration file.
Command or Action Purpose Step 1 configure terminal Example: Device# configure terminal Enters global configuration mode. Step 2 interface interface range Example: Device(config)# interface g5/0/17, g5/0/22, g6/0/12 Enters interface configuration mode for the Layer 2 interface range to be configured. Step 3 switchport mode private-vlan { host | promiscuous | trunk promiscuous | trunk [secondary]} Example: Configures the Layer 2 ports as private VLAN promiscuous trunk port. VLAN Configuration Guide, Cisco IOS XE 17.16.x (Catalyst 9300 Switches) 87