Commodore Amiga 1000 — Commodore Amiga 1000 Hardware Reference Manual PDF Download

SPRITE DISPLAY EXAMPLE This example displays the spaceship sprite at location V = 65, H = 128. Remember to include the file "hw_examples.i", located in Appendix J. ; First, we set up a single bit-plane. ; LEA CUSTOM,a0 ; Point a0 at custom chips MOVE.W #$1200,BPLCON0(a0) ; 1 bit-plane color is on MOVE.W #$0000,BPL1MOD(a0) ; Modulo = 0 MOVE.W #$0000,BPLCON1(a0) ; Horizontal scroll value = 0 MOVE.W #$0024,BPLCON2(a0) ; Sprites have priority over playfields MOVE.W #$0038,DDFSTRT(a0) ; Set data-fetch alert MOVE.W #$00D0,DDFSTOP(a0) ; Set data-fetch stop ; Display window definitions. MOVE.W #$2C81,DIWSTRT(a0) ; Set display window start ; Vertical start in high byte.

; Horizontal start * 2 in low byte. MOVE.W #$F4C1,DIWSTOP(a0) ; Set display window stop ; Vertical stop in high byte. ; Horizontal stop * 2 in low byte. ; ; Set up color registers. ; MOVE.W #$0008,COLOR00(a0) ; Background color = dark blue MOVE.W #$0000,COLOR01(a0) ; Foreground color = black MOVE.W #$0FF0,COLOR17(a0) ; Color 17 = yellow MOVE.W #$00FF,COLOR18(a0) ; Color 18 = cyan MOVE.W #$0FOF,COLORl9(a0) ; Color 19 = magenta ; ; Move Copper list to $20000. ; MOVE.L #$20000,a1 ; Point A1 at Copper list destination LEA COPPERL(pc),a2 ; Point A2 at Copper list source CLOOP:

MOVE.L (a2),(a1)+ ; Move a long word CMP.L #$FFFFFFFE,(a2)+ ; Check for end of list BNE CLOOP ; Loop until entire list is moved ; ; Move sprite to $25000. ; MOVE.L #$25000,a1 ; Point A1 at sprite destination LEA SPRITE(pc),a2 ; Point A2 at sprite source SPRLOOP: MOVE.L (a2),(a1)+ ; Move a long word CMP.L #$00000000,(a2)+ ; Check for end of sprite BNE SPRLOOP ; Loop until entire sprite is moved ; ; Now we write a dummy sprite to $30000, since all eight sprites are ; activated ; at the same time and we're only going to use one. The remaining sprites ; will point to this dummy sprite data. ; MOVE.L #$00000000,$30000 ; Write it ; ; Point Copper at Copper list. - 108 Sprite Hardware -