Commodore Amiga 1000 — Commodore Amiga 1000 Hardware Reference Manual PDF Download

NOTE The Clock Interval is derived from the clock constant, where: 1 clock interval = -------------- clock constant then scale the result to microseconds. In all of these calculations "ticks" and "timing intervals" refer to the same thing. SPECIFYING THE PERIOD VALUE After you have selected the desired interval between data samples, you can calculate the value to place in the period register by using the period formula: desired interval clock constant Period value = ---------------- = ------------------ clock interval samples per second As an example, say you wanted to produce a 1 KHz sine wave, using a Table of eight data samples (four data words) (see Figure 5-3). Figure 5-3:

Example Sine Wave - Audio Hardware 139 -