Commodore Amiga 1000 — Commodore Amiga 1000 Hardware Reference Manual PDF Download

SYSTEM RESPONSE As soon as DMA starts, a. Copy to "back-up" length register from AUDOLEN. b. Copy to "back-up'' location register from AUDOLCL (will be used as a pointer showing current data word to fetch). c. Create an interrupt for the 68000 saying that it has completed retrieving working copies of length and location registers. d. Start retrieving audio data each allocated DMA time slot. PLAYING MULTIPLE TONES AT THE SAME TIME You can play multiple tones either by using several channels independently or by summing the samples in several data sets, playing the summed data sets through a single channel.

Since all four audio channels are independently programmable, each channel has its own data set; thus a different tone or musical note can be played on each channel. MODULATING SOUND To provide more complex audio effects, you can use one audio channel to modulate another. This increases the range and type of effects that can be produced. You can modulate a channel's frequency or amplitude, or do both types of modulation on a channel at the same time. Amplitude modulation affects the volume of the waveform. It is often used to produce vibrato or tremolo effects. Frequency modulation affects the period of the waveform.

Although the basic waveform itself remains the same, the pitch is increased or decreased by frequency modulation. The system uses one channel to modulate another when you attach two channels. The attach bits in the ADKCON register control how the data from an audio channel is interpreted (see the Table below). Normally, each channel produces sound when it is enabled. If the "attach" bit for an audio channel is set, that channel ceases to produce sound and its data is used to modulate the sound of the next higher-numbered channel. When a channel is used as a modulator, the words in its data set are no longer treated as two individual bytes. Instead, they are used as "modulator" words.

The data words from the modulator channel are written into the corresponding registers of the modulated channel each time the period register of the modulator channel times out. - Audio Hardware 145 -