Commodore Amiga 1000 — Commodore Amiga 1000 Hardware Reference Manual PDF Download

with zeros shifted in from the left. The second word will be the second word fetched from the A, shifted right, with the least significant (rightmost) four bits of the first word shifted in. Next, we will write the first word of the second row fetched from A, shifted four bits, with the least significant four bits of the last word from the first row shifted in. This would continue until the blit is finished. On shifted blits, therefore, we only get zeros shifted in for the first word of the first row. On all other rows the blitter will shift in the bits that it shifted out of the previous row. For most graphics applications, this is undesirable.

For this reason, the blitter has the ability to mask the first and last word of each row coming through the A DMA channel. Thus, it is possible to extract rectangular data from a source whose right and left edges are between word boundaries. These two registers are called BLTAFWM and BLTALWM, for blitter A channel first and last word masks. When not in use, both should be initialized to all ones ($FFFF). NOTE Text fonts on the Amiga are stored in a packed bit map. Individual characters from the font are extracted using the blitter, masking out unwanted bits. The character may then be positioned to any pixel alignment by shifting it the appropriate amount.

These masks are "anded" with the source data, before any shifts are applied. Only when there is a 1 bit in the first-word mask will that bit of source A actually appear in the logic operation. The first word of each row is anded with BLTAFWM, and the last word is "anded" with BLTALWM. If the width of the row is a single word, both masks are applied simultaneously. The masks are also useful for extracting a certain range of "columns" from some bitplane. Let us say we have, for example, a predrawn rectangle containing text and graphics that is 23 pixels wide. The leftmost edge is the leftmost bit in its bitmap, and the bitmap is two words wide.

We wish to render this rectangle starting at pixel position 5 into our 320 by 200 screen bitmap, without disturbing anything that lies outside of the rectangle. - 174 Blitter Hardware -