BLTCON0 bits 15-12 = x1 modulo 15 BLTCON0 bits SRCA, SRCC, and SRCD = 1 BLTCON0 bit SRCB = 0 if exclusive-or line mode: _ _ then BLTCON0 LF control byte = ABC + AC _ else BLTCON0 LF control byte = AB + AC BLTCON1 bit LINEMODE = 1 BLTCON1 bit OVFLAG = 0 BLTCON1 bits 4-2 = octant number from Table BLTCON1 bits 15-12 = start bit for line texture (0 = last significant bit) if (((4 * dy) - (2 * dx)) then BLTCON1 bit SIGNFLAG = 1 else BLTCON1 bit SIGNFLAG = 0 if one pixel/row: then BLTCON1 bit ONEDOT = 1 else BLTCON1 bit ONEDOT = 0 BLTSIZE bits 15-6 = dx + 1 BLTSIZE bits 5-0 = 2 NOTE You must set the BLTSIZE register last as it starts the blit. - Blitter Hardware 187 -